OnSite NTU overview
14
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
1
• General information
•
Built-in ping and traceroute facilities.
•
Integrated DHCP server (RFC 2131).
•
DNS relay with primary and secondary name server selection.
•
Frame Relay with Annex A/D LMI, RFC 1490 and FRF.12 Fragmentation.
PPP Support
•
Point-to-point protocol over HDLC
•
PPPoE (RFC 2516) Client for autonomous network connection. Eliminates the requirement of installing
client software on a local PC and allows sharing of the connection across a LAN.
•
User configurable PPP PAP (RFC 1661) or CHAP (RFC 1994) authentication.
WAN Interfaces
•
T1/E1
Management
•
Web-based configuration via embedded web server
•
CLI menu for configuration, management, and diagnostics.
•
Local/Remote CLI (VT-100 or Telnet).
•
SNMPv1 (RFC 1157) MIB II (RFC 1213)
•
Logging via SYSLOG, and VT-100 console. Console port set at 9600 bps 8/N/1 settings no flow control.
Front Panel Status LEDs and Console Port
The OnSite NTUs have all status LEDs and console port on the front panel of the unit, and all other electrical
connections are located on the rear panel.
Figure 1. OnSite E1/T1 NTU (Model 2701A/I)
