OnSite NTU overview
13
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
1
• General information
OnSite NTU overview
The OnSite NTU enables the termination of E1 or T1 to 10/100Base-TX. The device is configured for plug-
and-play operation. The device comes with an auto-sensing full-duplex 10/100Base-T Ethernet port, MDI-X
cross-over switch, console port, and internal or external power supply.
The following sections describes the OnSite device features and capabilities:
•
General attributes, see section
•
Ethernet, see section
•
Protocol support, see section
•
PPP support, see section
•
•
WAN interface, see section
•
Front panel status LED see section
“Front Panel Status LEDs and Console Port”
General attributes
•
Compact, low cost NTU/bridge
•
10/100 Ethernet
•
Comprehensive hardware diagnostics. Easy maintenance and effortless installation.
•
Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.
•
Built-in web configuration.
•
Setup allows for standard IP address and unique method for entering an IP address and mask
without
requiring a console connection. Default IP address of 192.168.1.1/24.
•
Simple software upgrades obtained via FTP.
•
Front panel LEDs indicate
Power, WAN,
and
Ethernet LAN
speed and status.
•
Convenient and standard RJ connectors for
Ethernet
,
Line
, and
Console
.
•
Standard one-year parts and labor warranty.
Ethernet
•
Auto-sensing full-duplex 10Base-T/100Base-TX Ethernet.
•
Standard RJ-45 connector
•
Built-in MDI-X cross-over switch.
•
IEEE 802.1d transparent learning bridge
•
2 IP address/subnets on Ethernet interface.
Protocol support
•
Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950),
ARP (RFC 826).
