WAN Serial Port Configuration
30
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
4
• Serial Port Configuration
WAN Serial Port Configuration
The OnSite NTU uses a T1/E1 interface for connection to standard WAN services. Below are the configura-
tion options for the WAN interface.
T1/E1 Interface Configuration
The OnSite 2701A is equipped with a user selectable T1/E1 interface. The T1 interface is presented on an RJ-
48C (100-ohm) connector, while the E1 interface can use the RJ-48C (120-ohm) or dual BNC (75-ohm) con-
nectors.
The 2701A T1/E1 serial port configuration page appears in
.
Figure 12. Model 2701A T1/E1 WAN port configuration parameters
Configuring the OnSite 2701A for T1 Operation
Web Configuration.
Launch
Netscape, Internet Explorer
or similar web browser, type the IP address of the
2701A, enter username
superuser
and password
superuser
. From the main page click on the
T1/E1 > Configu-
