Restart
58
OnSite 2701A/I E1/T1 Ethernet Bridge (NTU) User Manual
7
• System Configuration
Figure 38. Saving or reloading previously saved configuration files
Restart
From this webpage, you can do a soft reboot of the OnSite or restore the OnSite to factory defaults. To restore
to factory defaults, click on the box for
Reset to factory default settings
. (see
.) Then click on the
Restart
button. No warning is given before beginning the reboot process. You will need to configure the IP address of
the Ethernet port again as described in Chapter 3, Initial Configuration.
Figure 39. Restoring to factory defaults
Website Settings
The refresh rate of the webpages is a configurable parameter. Enter the desired refresh rate (in seconds) and
click on the Update button. Default value is 4 seconds. (See
.)
Figure 40. Webpage refresh rates
