Routing Setup
77
Model 3101 Series Getting Started Guide
5 • Advanced Configuration
Default Gateway
The
Routing–Default Gateway
page (
Figure 91
) is the default page that displays when you click on
Routing
in the
Advanced Setup
menu. From this page, you can modify the default gateway settings. Select a proper
WAN interface in the list of
Available Routed WAN Interfaces
as the system default gateway.
Click
Apply/
Save
to activate any changes.
Figure 91. WMI: Routing - Default Gateway
Static Route
Click
Routing > Static Route
to view current route entries. Click
Add
to create a new static route entry. The
Routing–Static Route Add
page displays (
Figure 92
).
Figure 92. WMI: Adding a Static Route
On this page, you can add or remove a static routing rule of IPV4 or IPv6.
•
IP Version:
Select the IP version to be IPv4 or IPv6.
•
Destination IP address/prefix length:
Enter the destination IP address.
•
Interface:
Select the proper interface for the rule.