WAN Service Setup
53
Model 3101 Series Getting Started Guide
5 • Advanced Configuration
4.
On the
Service Configuration
page (
Figure 44
), modify the service description
.
Click
Next
to continue.
Figure 44. WMI: IPoA Service Description
5.
On the
WAN IP Settings
page, enter the WAN IP address and the WAN subnet mask provided by your
ISP. Click
Next
to continue.
Figure 45. WMI: WAN IP Settings
6.
On the
Network Address Translation Settings
page (
Figure 46
), you may modify NAT Settings and select
to enable IGMP Multicast.
–
Enable NAT:
Select to enable the NAT functions of the 3101. If you do not enable NAT, you must add
a route on the uplink equipment; otherwise, the access to the Internet will fail. It is recommended to
enable NAT.
–
Enable Firewall:
Enable/disable IP filtering.
–
Enable IGMP Multicast:
Enable IGMP if you need MER mode to support IPTV.
Click
Next
to continue.
Figure 46. WMI: NAT Settings