Connect with Web GUI
87
CopperLink CL2300 User Manual
11
• Wizard Interface
•
Line Type (Local or Remote):
This will set the Ethernet Extender as Local or Remote. Local is typically used
at the network, Remote is typically used at the remote device or remote network. Your CopperLink CL2300
when received in a 2pk is already configured one CL2300 as Local and one CL2300 as Remote.
•
Service Mode:
Configures the number of pairs (wires) you want to use. The CL2300 will default to the maxi-
mum number of wires available on your version of the CopperLink. CL2301 (2-wire); CL2302 (4-wire);
CL2304 (8-wire).
•
Annex:
Please consult support before changing this setting.
•
Line Rate Configuration:
This will increase the potential line rate of the CL2300. Your CopperLink CL2300
is defaulted to automatically select the optimal rate based on the distance (adaptive).
Note
There are two mates: Normal (TCPAM16|32) and Extended
(TCPAM64|128). Selecting the Extended mode will double the bandwith,
but will reduce the reach (distance) in half. Default is normal.
On the bottom right corner of the CL2300 Basic Configuration wizard page to preview configurations and
reboot.
depicts what you can expect to see if you click on the preview tab.