Context IP is your routing core. You
may configure as many interfaces as
needed. Remember to bind to the
correct interface
You are not limited to how many
bridge-groups you can create inside
of the Context bridge.
If you have VLAN’s on your network,
remember to configure
“switch mode vlans”
Context Bridge: SW Bridge Introduction
33
CopperLink CL2300 User Manual
4
• CL2300 Bridging Contexts
Figure 12. Breaking down Trinity IOS concepts
Bridge Groups
Description
Bridge Group
Enters or creates a bridge-group
No
Disable features or reset to default behaivior
Aging
MAC table aging value in seconds
Arp
Arp Enable
Filter
Filter Command for MAC
Mulitcast
Enable Multicast
Session
Create PPPoE session
Settap
configure a bridge tap
Shutdown
Shutdown the selected interface
STP
Configure spanning tree
VLAN
Enter a VLAN Configuration
•
Permit{src | any}{dest | any}[VLAN ID]