Accessing the CLI task list
54
CopperLink CL2300 User Manual
7
• Accessing the CLI
The following example shows how to add a new superuser account with a login name
super
and a matching
password
Gh3*Ke4h
.
device>enable
device#configure
device(cfg)#superuser super password Gh3*Ke4h
device(cfg)#copy running-config startup-config
Displaying the CLI version
This procedure displays the version of the currently running CLI.
Mode:
Operator execution
Step
Command
Purpose
1
device>
show version cli
Displays the CLI version
Example:
Displaying the CLI version
The following example shows how to display the version of the current running CLI on your device, if you
start from the operator execution mode.
device>show version cli
CLI version: 3.00
Displaying account information
You can use the
show
command to display information about existing administrator and operator accounts.
This command is not available for an operator account.
The following procedure describes how to display account information:
Mode:
Administrator execution
Step
Command
Purpose
1
device#
show accounts
Displays the currently-configured administrator and operator
accounts.
Example:
Display account information
The following example shows how to display information about existing administrator and operator accounts.
device#show accounts
# UserName AccessLevel Status
0 super superuser (logged out:0)
1 admin administrator (logged out:0)
2 op operator (logged out:0)
Checking identity and connected users
The
who
command displays who is logged in or gives more detailed information about users. Depending on
the execution mode, the command displays varying information. In administrator execution mode, the com-
mand output is more detailed and shows information about the ID, user name and location. In operator execu-
tion mode, only the user name being used at the moment is reported, which helps checking the identity.