Phone 1
43
SmartLink M-ATA Getting Started Guide
5 • Telephony
Phone Number
Enter the telephone number or the user part of the SIP registration.
User Name
Enter the user name that will be used for validation of the VoIP SIP registration or call invitation.
Port
Specify the signaling port.
CallerID Name
Enter the caller ID name.
Password
Enter the password.
Supplementary Service Activation
These settings enable or disable each of following calling features. Most features can also be enabled or disabled
by using the telephone handset (see section
“Supplementary Service Keys”
on page 58 for details).
Figure 21. Supplementary Service Settings section of Phone 1 window
Call Forward All
Enable call forward all service—All received calls will be forwarded to the destination specified under the call
forwarding settings.
Selective Call Forward
Enable call forward no answer service—All received calls that are not answered will be forwarded to the desti-
nation specified under the call forwarding settings.
Three-Way Conferencing
Enable three way conference service—This service enables you to add a third party to an existing two-way con-
versation, and hold a three-party conference call.
Incoming Call Block
Enable incoming call block service—Allows for selected inbound caller IDs to be blocked.
Summary of Contents for Patton SmartLink M-ATA
Page 17: ...17 Chapter 1 General information Chapter contents SmartLink M ATA overview 18 ...
Page 68: ...68 Chapter 7 Documentation Chapter contents Introduction 69 ...
Page 70: ...70 Chapter 8 Logout Chapter contents Introduction 71 ...
Page 83: ...83 Appendix D Calling Features Chapter contents Introduction 84 ...
