Patton electronics Patton SmartLink M-ATA Getting Started Manual Download Page 35 | Manualshive

Page: 35 / 86

background image

VoIP Status

35

SmartLink M-ATA Getting Started Guide

5 • Telephony

VoIP Status

Figure 11. VoIP Status window

VoIP Server Registration Status

Current Server

Shows the current VoIP server that has been pre-defined or has been discovered using DNS service records
(DNS-SRV).

Domain

The VoIP domain name is the domain name that is hosting the VoIP server.

Base RTP Port

Displays the base RTP port number for the RTP-RTCP port pair.

Phone Line Status

The Phone Line Status table shows the current operational status of the phone. It displays the VoIP registration
status, the configured VoIP username, if the username is subscribed to voicemail and has messages waiting, and
the caller ID setting. The messages waiting will indicate the number of new messages, old messages, new
urgent messages and old urgent messages.

Registration Status

Shows the currently operational status of the phone. The following registration status values may be displayed:

•

Phone No. not config

—The phone number has not yet been configured for the phone line. Go to Phone 1

to enter the phone configuration.

•

Online

—The phone line is online, registered with the SIP server and ready to send and receive phone calls

using the SIP server.

•

Registering

—The SmartLink M-ATA is in the process of registering with the VoIP server.

«
...
33
34
35
36
37
...
»

Summary of Contents for Patton SmartLink M-ATA























































































Reviews:

No comments

Related manuals for Patton SmartLink M-ATA

Brand: Pace Pages: 14

Wireless Print Solutions Adapter

Brand: Xerox Pages: 54

Brand: StarTech.com Pages: 13

Brand: Emos Pages: 24

Brand: Tekram Technology Pages: 4

Brand: I-Rocks Pages: 15

Brand: X-Micro Pages: 14

Brand: StarTech.com Pages: 9

Brand: Solisto Pages: 12

Brand: Synapse Pages: 33

Brand: Allen-Bradley Pages: 4

2208USB/ETH - annexe 1

Brand: SMC Networks Pages: 24

Brand: D-Link Pages: 8

Brand: D-Link Pages: 23

Brand: D-Link Pages: 44

XTREME N DUAL BAND USB ADAPTER DWA-160

Brand: D-Link Pages: 60

Brand: D-Link Pages: 70

Xreme N DWA-160

Brand: D-Link Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands