![background image](http://html.mh-extra.com/html/patton-electronics/patton-smartlink-m-ata/patton-smartlink-m-ata_getting-started-manual_763161057.webp)
Localization
57
SmartLink M-ATA Getting Started Guide
6 • System
Distinctive Ring Settings
The SmartLink M-ATA Distinctive Ring Settings window (see
figure 33
) enables you to specify up to 8 sets of
distinctive ring cadences.
Figure 33. Distinctive Ring Setting section of Localization window
The following is a sample ring cadence pattern configuration:
Timeval ::= time in milliseconds
Repeatval ::= # of cycles to repeat
Tonename ::= "RING_0" | "RING_1" | "RING_2" | "RING_3" | "RING_4"
| "RING_5" | "RING_6" | "RING_7" | "RING_8" | "RING_9"
Idle ::= "IDLE"
Active ::= "ON" | "OFF"
Inactive ::= Idle "(" Timeval ")"
Active ::= Active "(" Timeval ")"
Sequence ::= Active | Active "," Sequence
Repetition ::= "[" Sequence "]" Repeatval
Repeat ::= "R"
Cycle ::= Sequence | Repetition
Fullsequence ::= Cycle | Cycle "," Fullsequence
Cadence ::= Fullsequence | Fullsequence "," Repeat | Fullsequence
"," Inactive "," Repeat
Ring ::= Cadence
Note
The Bellcore standard ring cadence patterns are shown in
table 2
.
Table 2. Bellcore standard ring cadence patterns
Name
Value
RING_0
ON(2000), IDLE(4000), R
RING_1
ON(800), OFF(400), ON(800), IDLE(4000), R
RING_2
ON(400),OFF(200)]2,ON(800),IDLE(4000),R
RING_3
ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R
RING_4
ON(500)
RING_5
Summary of Contents for Patton SmartLink M-ATA
Page 17: ...17 Chapter 1 General information Chapter contents SmartLink M ATA overview 18 ...
Page 68: ...68 Chapter 7 Documentation Chapter contents Introduction 69 ...
Page 70: ...70 Chapter 8 Logout Chapter contents Introduction 71 ...
Page 83: ...83 Appendix D Calling Features Chapter contents Introduction 84 ...