manualshive.com logo in svg

Patton electronics Patton SmartLink M-ATA, Getting Started Manual

Share
Download
Patton electronics Patton SmartLink M-ATA Getting Started Manual Download Page 54

Service Access

54

SmartLink M-ATA Getting Started Guide 

6 • System

NTP Server

Specify the IP address of the NTP server.

Time Zone

Select the GMT time zone for your location. For help in determining the time zone, go to the UTC/GMT 
Conversion website at 

http://www.dxing.com/utcgmt.htm

.

Adjust clock for daylight savings

Select Yes if you want the M-ATA to automatically compensate for daylight savings time.

Saving your work

When you are finished configuring settings, click the 

Save 

button to save the changes.

Service Access

Figure 31. Service Access window

Enable HTTP

When checked access to the web configuration interface (HTTP) of the SmartLink M-ATA through the WAN 
interface port is enabled.

Note

If the Enable HTTP option is not checked, your WAN service provider will 
no longer be able to access the SmartLink M-ATA to make 
configuration changes.

Enable Ping Reply

When checked, the SmartLink M-ATA will reply to ping requests received on the WAN port. If the option is 
not checked, the SmartLink M-ATA will not respond to ping requests received on the WAN port.

Saving your work

When you are finished configuring settings, click the 

Save Service Access Settings 

button to save the changes.

Summary of Contents for Patton SmartLink M-ATA























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands