Localization
55
SmartLink M-ATA Getting Started Guide
6 • System
Localization
The Localization window contains the following sections:
•
Call Progress Tones (see
figure 32
on page 56)
•
Distinctive Ring Setting (see
figure 33
on page 57)
•
Supplementary Service Keys (see
figure 34
on page 58)
•
Control Timer Values (see
figure 36
on page 61)
•
FXS Port (see
figure 37
on page 62)
•
Ring Setting (see
figure 38
on page 63)
•
FXS Port Polarity (see
figure 39
on page 63)
Note
After configuring the sections, click the
Save
button (see
figure 39
on
page 63) to save the new configuration.
Call Progress Tones
The dialtone, confirmation, busy, ringback and offhook warning call progress tones that are played to the
handset can be set manually or the tones will be set automatically to the country specified under Call ID
method if the checkbox, Call Progress Tones synchronization has been selected.
To set the call progress tones manually specify:
[frequency 1]@[Energy 1]+[frequency 2]@[Energy 2]#ON([ms]),OFF([ms]),R
Where:
•
Frequency 1 and frequency 2 are the frequency of the tone to be played.
•
Energy 1 and energy 2 are the energy level of the tone to be played in dBm.
•
ON(ms) is the duration that the tone will be played in milliseconds.
•
OFF(ms) is the duration of the pause between cycles of playing the tone.
•
R indicates the tone should be repeated using the ON and OFF durations specified
Summary of Contents for Patton SmartLink M-ATA
Page 17: ...17 Chapter 1 General information Chapter contents SmartLink M ATA overview 18 ...
Page 68: ...68 Chapter 7 Documentation Chapter contents Introduction 69 ...
Page 70: ...70 Chapter 8 Logout Chapter contents Introduction 71 ...
Page 83: ...83 Appendix D Calling Features Chapter contents Introduction 84 ...
