manualshive.com logo in svg

Patton electronics Patton SmartLink M-ATA, Getting Started Manual

Share
Download
Patton electronics Patton SmartLink M-ATA Getting Started Manual Download Page 28

Settings

28

SmartLink M-ATA Getting Started Guide 

4 • Network—LAN

Internet Configuration

Figure 5. Internet Configuration section of the Settings window

Obtain LAN configuration dynamically

Select this option if appropriate. If you choose Obtain LAN configuration dynamically, the information is 
detected automatically through DHCP.

Specify fixed LAN configuration

Select this option if you will not be using DHCP. If you choose Specify fixed LAN configuration, you will have 
to enter the following information:

•

IP address.

•

IP of the netmask.

•

IP of the gateway.

•

IP of the DNS Server, if applicable.

•

Host name (the name will identify the computer on the Internet, such as SL4020.patton.com).

•

Domain name (the name that will identify one or more IP addresses). For example, the patton.com domain 
is used by Patton Electronics Company. That domain can include multiple hostnames (such as 

SL4020

.patton.com, ftp.patton.com, and so on) that point to individual computers on the Patton network. 

In short, for the hostname URL http://www.patton.com, the domain name is patton.com.

Summary of Contents for Patton SmartLink M-ATA























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands