![background image](http://html1.mh-extra.com/html/patton-electronics/iplink-2821/iplink-2821_getting-started-manual_4067682127.webp)
Introduction
127
IPLink 2800 Series Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the IPLink to the existing network infrastruc-
ture and to third party products.
Serial console
The IPLink can be connected to a serial terminal over its serial console port, as depicted in
Figure 25. Connecting a serial terminal
Note
“Console port, RJ-45, EIA-561 (RS-232)”
for console port pin-outs.
The interconnecting cables must be acceptable for external use
and must be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Link
100M
Activity
Enet 0
IPLink VPN
Router
Run
Link
100M
Activity
Enet 1
P
ower
Console
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each IPLink 2800 Series device
Summary of Contents for IPLink 2821
