Patton electronics 3120, Administrator'S Reference Manual

Page: 266 / 331

22 • T1/E1 Link Model 3120 RAS Administrators’ Reference Guide
266 Alarms Present
The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms)
and a LoopbackState simultaneously.
dsx1NoAlarm should be set if and only if no other flag is set.
If the dsx1LoopbackState bit is set, the loopback in effect can be determined from the dsx1LoopbackConfig
object.
The various bit positions are:
1 dsx1NoAlarm No Alarm Present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 dsx1XmtFarEndLOF Near end sending LOF Indication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code
4096 dsx1OtherFailure any line status not defined here”
::= { dsx1ConfigEntry 10 }
ISDN Signaling Alarms (linkSignalStatus)
Note ISDN Signaling Alarms will only appear if the T1/E1 is configured as
a PRI.
Figure 106. ISDN Signalling Alarms