manualshive.com logo in svg

Patton electronics 3120, Administrator'S Reference Manual

Looking for the OBH Nordica 3120 Instruction Manual? Look no further! Gain access to a comprehensive manual for your OBH Nordica 3120, available for free download on manualshive.com. Easily get the information you need to optimize the functionality of your appliance and enjoy a hassle-free user experience.

Share
Download
background image

177

Chapter 14

Frame Relay

Chapter contents

Introduction ........................................................................................................................................................179
The Frame Relay main window ...........................................................................................................................179

Link X (frDlcmiIfIndex)  ...............................................................................................................................180

Status: X (framerelStatus)  ........................................................................................................................180

HDLC Statistics on Link  ..............................................................................................................................180

Transmit (Bits/Sec) (framerelTxOctets)  ..................................................................................................180
Receive (Bits/Sec) (framerelRxOctets)  .....................................................................................................180
No Buffers Available (framerelRxNoBufferAvailable)  ..............................................................................180
Data Overflow (framerelRxDataOverflow) ..............................................................................................180
Message Ends (framerelRxMessageEnds) .................................................................................................180
Packets Too Long (framerelRxPacketTooLong)  ......................................................................................180
Overflow (framerelRxOverflow) ..............................................................................................................180
Aborts (FramerelRxAbort) .......................................................................................................................180
Bad CRC (framerelRxBadCrc)  ................................................................................................................181
Invalid Frames (framerelRxInvalidFrame)  ...............................................................................................181
Tx Underrruns (framerelTxUnderrun) ....................................................................................................181
LINK Resets (framerelResets) ..................................................................................................................181
Produce Status Change Trap (frTrapState) ..............................................................................................181

DLMI Window ...................................................................................................................................................181

Signalling (frDlcmiState)  ..............................................................................................................................182
Data Link Protocol (frDlcmiAddress)  ...........................................................................................................182
DLCI Length (frDlcmiAddressLen)  ..............................................................................................................182
Polling Interval (T391)( frDlcmiPollingInterval)  ..........................................................................................182
Full Enquiry Interval (N391)( frDlcmiFullEnquiryInterval)  .........................................................................182
Error Threshold (N392)( frDlcmiErrorThreshold)  .......................................................................................182
Monitored Events (N393)( frDlcmiMonitoredEvents)  .................................................................................182
MultiCast Service (frDlcmiMulticast)  ...........................................................................................................182
Max Virtual Circuits (frDlcmiMaxSupportedVCs)  .......................................................................................182
LMI Interface (frDlcmiInterface)  ..................................................................................................................183
Bidirectional Polling(frDlc rDlcmiPollingBiDir)  ..........................................................................................183
Polling Verification (T392)( frDlcmiPollingVerification)  .............................................................................183

DLCI window .....................................................................................................................................................183

DLCI (frCircuitDlci)  ....................................................................................................................................184
Interface # (FrameIPInterfaceNum)  ..............................................................................................................184
State (frCircuitState)  .....................................................................................................................................184
Committed Burst (bits) (frCircuitCommitedBurst)  ......................................................................................184
Excess Burst (bits) (frCircuitExcessBurst) ......................................................................................................184
Throughput (bits) (frCircuitThroughput) .....................................................................................................184
IP Address (FrameIPAddr) ............................................................................................................................184

Summary of Contents for 3120












































































































































































































































































































































Reviews:

No comments

Related manuals for 3120

G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
Hanwha WRR-5301 Replacement Manual preview
WRR-5301
Brand: Hanwha Pages: 3
IBM 88631SU - System x3850 - 8863 Installation Manual preview
88631SU - System x3850 - 8863
Brand: IBM Pages: 90
HPE ProLiant DL180 Gen10 Product End-Of-Life Disassembly Instructions preview
ProLiant DL180 Gen10
Brand: HPE Pages: 10
NEC N8100-1056F User Manual preview
N8100-1056F
Brand: NEC Pages: 408
Zenith z-server lt User Manual preview
z-server lt
Brand: Zenith Pages: 218
Ideon Audio Absolute Stream User Manual preview
Absolute Stream
Brand: Ideon Audio Pages: 24
Sun Microsystems Sun Fire X2100 M2 Service Manual preview
Sun Fire X2100 M2
Brand: Sun Microsystems Pages: 128
SafeNet ProtectServer External 2 Installation Manual preview
ProtectServer External 2
Brand: SafeNet Pages: 22
Supero SuperServer 6024H-82 User Manual preview
SuperServer 6024H-82
Brand: Supero Pages: 122
IBM eServer xSeries 335 Type 8676 Hardware Maintenance Manual And Troubleshooting Manual preview
eServer xSeries 335 Type 8676
Brand: IBM Pages: 178
LevelOne FNS-1000 User Manual preview
FNS-1000
Brand: LevelOne Pages: 53
Avaya CS 1000 Fundamentals preview
CS 1000
Brand: Avaya Pages: 270
Planet FPS-1100DG User Manual preview
FPS-1100DG
Brand: Planet Pages: 72
Planet FPS-3300 User Manual preview
FPS-3300
Brand: Planet Pages: 71
IBM 326m - eServer - 7969 Installation Manual preview
326m - eServer - 7969
Brand: IBM Pages: 82
IBM 7145 Installation And User Manual preview
7145
Brand: IBM Pages: 136
Intel S2600KP Configuration Manual preview
S2600KP
Brand: Intel Pages: 31

Brands by name

Popular brands

Load more brands