8 • Dial Out
Model 3120 RAS Administrators’ Reference Guide
130
Dial Out User Statistics window
Local PPP Protocol Compression (doStatLocalToRemoteProtComp)
Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state (for
more information, refer to “Operational Status (diIpOperStatus)” on page 97). These are the available options:
•
disabled(0)—PPP compression is disabled
•
enabled(1)—PPP compression is enabled
Remote PPP Protocol Compression (doStatRemoteToLocalProtComp
Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state (for
more information, refer to “Operational Status (diIpOperStatus)” on page 97). These are the available options:
•
disabled(0)—PPP compression is disabled
•
enabled(1)—PPP compression is enabled
Local AC Compression (doStatLocalToRemoteACComp)
Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting
packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass packets
—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 97). These
are the available options:
•
disabled(0)—ACC is disabled
•
enabled(1)—ACC is enabled
Remote AC Compression (doStatRemoteToLocalACComp)
Indicates whether the remote PPP entity will use address and control compression (ACC) when transmitting
packets to the local PPP entity. This setting becomes active when the link is in the up—able to pass packets—
operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 97). These are
the available options:
•
disabled(0)—ACC is disabled
•
enabled(1)—ACC is enabled
Local Frame Check Sequence size (doStatTransmitFcsSize)
The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to
the remote node. This setting becomes active when the link is in the up—able to pass packets—operational
state (for more information, refer to “Operational Status (diIpOperStatus)” on page 97). The values are from 0
to 128.
Remote Frame Check Sequence size (doStatReceiveFcsSize)
The size (in bits) of the frame check sequence (FCS) that the remote node will generate when sending packets
to the local node. This setting becomes active when the link is in the up—able to pass packets—operational
state (for more information, refer to “Operational Status (diIpOperStatus)” on page 97). The values are from 0
to 128.
Summary of Contents for 3120
