An example of using a filter
173
Model 3120 RAS Administrators’ Reference Guide
13 • Filter IP
Figure 71. IP Filter showing default for dialout
Default for dialout (filterIpDefaultDialout)
This option applies the filter as a default for all dialout locations. If a location has a filter specifically specified
for that location (see section “Locations Link” on page 121), the default filter is disabled for that location and
only the specified filter(s) is/are used. The following options are available:
•
no(0)
•
applyToDialout(1)
An example of using a filter
All customers are limited to the local mail server (mail.internal.com) and an internal website
(www.internal.com).
•
The IP address for mail.internal.com is: 192.10.10.1
•
for: www.internal.com is: 192.10.10.2
•
DNS server for name resolution is 192.10.10.1.
The filters needed:
•
ID:1
–
Name: Mail Server
–
Direction: inbound
–
Action: pass
–
Source IP and mask: not set
–
Destination IP: 192.10.10.1 mask: 255.255.255.255
–
Source Port: no compare
–
Destination Port: equal 110 for POP3 or 25 for SMTP
Summary of Contents for 3120
