Paton ProMIG-200, User Manual

Page: 123 / 130

PATON ProMIG DC MMA/TIG/MIG/MAG
- 122 -
The de-conserved source should be stored in dry closed premises at an air
temperature not lower than +5
0
С. The premises should be free of acid vapours and other
active substances.
11. TRANSPORTATION
The packed source is suitable to be transported by all transport means ensuring its safety in
compliance with the transport rules established for the applicable type of transport.
12. SCOPE OF SUPPLY
1. Arc power source with mains cable - 1 pc;
2. Wire feeder - 1 pc;
3. PATON corrugated box - 1 pc;
4. Cable with electrode holder ABICOR BINZEL - 1 pc;
5. Welding cable with ground terminal ABICOR BINZEL - 1 pc;
6. Quick-release pneumatic connector - 1 pc;
7. User manual - 1 pc;
For ProMIG-160-15-2/200-15-2/250-15-2/270-15-2:
- Semi-automatic torch ABICOR BINZEL - 1 pc;
- Rollers for solid wire (0.6-0.8; 1.0-1.2) - 2 sets;
- Belt for attaching the source to the wire feeder - 1 pc;
For ProMIG-250-15-4/270-15-4/350-15-4:
- Semi-automatic torch ABICOR BINZEL - 1 pc;
- Rollers for solid wire (0.8-1.0; 1.2-1.6) - 2 sets;
- Rollers for aluminium wire (0.8-1.0) - 1 set;
- Belt for attaching the source to the wire feeder - 1 pc;
For ProMIG-500-15-4/630-15-4:
- Rollers for solid wire (0.8-1.0; 1.2-1.6) - 2 sets;
- Rollers for aluminium wire (0.8-1.0) - 1 set.
13. SAFETY RULES
GENERAL
The welding unit is manufactured in accordance with technical standards and
established safety rules. However, if handled incorrectly, there is a hazard of:
- injury to service personnel or a third party;
- damage to the unit itself or to the company’s material assets;
- disruptions to an effective workflow.
All persons involved in the commissioning, operation, care and maintenance of the
unit must
- be appropriately certified;
- have expertise in welding;