Paton ProMIG-200, User Manual

Page: 124 / 130

- 123 -
PATON ProMIG DC MMA/TIG/MIG/MAG
- strictly follow these instructions.
The malfunctions that could impair safety must be urgently rectified.
USER RESPONSIBILITIES
The User undertakes to admit to work on the welding unit only the persons who:
- reviewed the basic safety rules, received training on the use of welding equipment;
- read the Section "Safety instructions" and the instructions on necessary precautions given
in this manual, and confirm this with their signature.
PERSONAL PROTECTIVE EQUIPMENT
For personal protection, observe the following rules:
- wear protective footwear that retains insulating properties, even in wet conditions;
- protect hands with insulating gloves;
- protect eyes with a protective mask with an anti-UV filter that meets safety standards;
- use only suitable (highly inflammable) clothing.
HAZARD OF HARMFUL GASES AND VAPOURS
- remove generated smoke and harmful gases from the working area with special means;
- ensure sufficient supply of fresh air;
-
vapours of solvents should not get into the radiation zone of the welding arc.
HAZARD OF SPARKLES
- remove flammable objects from the working area;
- do not perform welding works on containers where gases, fuel, oil products are or were
stored. Potential explosion hazard for residues of these products;
- in fire and explosion hazardous areas, observe the special rules in accordance with national
and international standards.
HAZARD OF MAINS AND WELDING CURRENT
- electric shock can be fatal;
- magnetic fields created by the high current can have a negative effect on the performance
of electrical devices (e.g., a pacemaker). Persons with such devices should seek the advice
of a physician before approaching a welding area;
- the welding cable must be robust, undamaged, and insulated. Loose connections and
damaged cables must be replaced immediately. An electrician must systematically check
the mains cables and cables of the welding unit for proper insulation;
- do not remove the outer casing of the unit during use.
INFORMAL PRECAUTIONS
- keep the instruction near the place of use of the welding unit at all times;