PATON
ProMIG
DC MMA/TIG/MIG/MAG
- 116 -
6. SELECTING AND CONFIGURING THE UNIT FUNCTIONS
If you do not press the buttons on the front panel, the unit displays the value of the
main parameter of the current welding mode on the digital indicator on the left:
1) in the MMA mode
–
welding current;
2) in the TIG mode
–
welding current;
3) in the MIG/MAG mode
–
welding voltage.
During the MIG/MAG welding, the left display shows the current value of the current
resulting from the following factors: used wire diameter, set voltage value at the source, set
wire feed speed on the feeder, gas used, material and the thickness of the workpiece to be
welded, etc. The value is shown within 8 seconds after the end of welding, this is necessary
for the welder to be able to double-check the current value, without any outside help. In the
MIG/MAG mode, the digital indicator on the right side shows the value of the wire feed speed
in "m/min".
Button
3
on the front panel of the unit is responsible for selecting the source
function in the current welding mode, and button
10
is responsible for selecting the function
of the feeder in MIG/MAG mode.
Button
4
on the front panel of the unit is responsible for selecting the welding mode.
Buttons
2
on the front panel of the source are responsible for changing the current
value on the digital indicator on the left.
Buttons
8
on the front panel of the feeder are responsible for changing the current
value on the digital indicator on the right.
6.1 SWITCHING TO THE REQUIRED FUNCTION
If the unit has a system of protection against unauthorized access to the function
menu, then if you press button
3
on the source, no changes are made on the left indicator,
i.e., this button is locked. To unlock, hold it down for more than 3.5 seconds. When unlocking,
the indicator displays an image of opening locks, indicating the process of unlocking the
function menu. After successful unlocking, by pressing button
3
, the current name of the
function and its value are displayed on the digital display.
Caution!
After releasing button
3
after 2 seconds, the screen will return to the main
parameter of the current welding mode. While the display is showing the current function,
its value can be changed up or down using buttons
2
. Alternatively, by quickly pressing and
releasing button
3
, you can switch to the next function, in a circle.
Caution!
If you hold down button
3
for more than 10 seconds, then the countdown
will appear on the display 333... 222... 111 ...; release the button before this time expires, so
as not to reset all the settings of this mode to the standard factory settings. This will be
reviewed in paragraph 6.3.
Similarly, by pressing button
10
, the digital indicator on the right displays the
graphic name of the current function of the wire feeder, and immediately after releasing it,
the current value of this function is displayed for 2 seconds. You can change the value up or
down with buttons
8
.
Summary of Contents for ProMIG-200
