Paton ProMIG-200, User Manual

Page: 129 / 130

PATON ProMIG DC MMA/TIG/MIG/MAG
- 128 -
14. WARRANTY OBLIGATIONS
PATON INTERNATIONAL guarantees the correct operation of the power supply
provided that the consumer observes the rules of operation, storage and transportation.
CAUTION! There is no free warranty service for mechanical damage to the welding unit!
Unit model Warranty period
ProMIG-200
5 years
ProMIG-250
ProMIG-270-400V
3 years
ProMIG-350-400V
ProMIG-500-400V
2 years
ProMIG-630-400V
The main warranty period starts from the date the inverter equipment is sold to the
end customer.
During the main warranty period, the seller undertakes, free of charge for the owner
of PATON inverter equipment:
- to make diagnostics and identify the cause of the malfunction;
- to provide assemblies and elements necessary for the repair;
- to carry out work to replace the failed elements and assemblies;
- to test the repaired equipment.
The main warranty obligations do not apply to the equipment:
- with mechanical damage that affected the performance of the unit (deformation of the
housing and parts as a result of falling from a height or falling of heavy objects on the
equipment, falling out of buttons and connectors);
- with traces of corrosion, which caused a malfunction;
- failed due to exposure of abundant moisture to its power and electronic elements;
- failed due to the accumulation of conductive dust inside (coal dust, metal shavings, etc.),
- in case of an attempt to independently repair its components and/or replace electronic
elements;
- it is recommended to clean the internal elements and assemblies of this equipment, with
compressed air, to remove the protective cover, depending on the operating conditions,
once every six months, in order to avoid the breakdown of the unit. Cleaning should be
done carefully, keeping the compressor hose at a sufficient distance to avoid damage to
the soldering of the electronic components and mechanical parts.
Also, the main warranty obligations do not apply to failed external elements of the
equipment exposed to physical contact, and related/consumable materials; the claims to the
following are accepted no later than two weeks after the sale:
- on and off button;
- knobs for adjusting welding parameters;
- connectors for connecting cables and hoses;