55
Touch Screen Symptoms
Symptom
Corrective Procedure
•
Touchscreen does not
function
•
No virtual mouse
•
Cursor doesn’t follow when
touching the screen
•
Reseat the panel cable.
•
Reseat the touchscreen board-to-touch panel cable.
•
Replace the touch control board.
•
Replace the touch panel.
Power Symptoms
Symptom
Corrective Procedure
•
Power shuts down unexpectedly
•
Cannot turn the system on
•
Reseat the power AC adapter cable.
•
Reseat the power AC adapter.
•
Replace the mainboard.
•
Cannot turn the system off
•
Hold down the power button for four seconds.
•
Replace the mainboard.
Network Symptoms
Symptom
Corrective Procedure
•
Cannot access LAN
•
Confirm that network hub/switch (if present) is
functioning correctly.
•
Reseat the RJ-45 cable.
•
Confirm green and orange LED activity of the RJ-45 jack.
•
Check the network TCP/IP settings.
•
Remove and reinstall the driver.
•
Replace the network cable.
•
Replace the mainboard.
Summary of Contents for SP-1060
