Partner SP-1060, Service Manual

Page: 30 / 72

30
Security Settings
This screen allows you to configure the system security settings.
Create or Change Adminitrator/ User Password
An administrator password takes precedence over a user password, and the administrator can limit
the activities of a user. To create or change a password, follow these steps:
1. Highlight the item Administrator/ User Password on the Security menu and press < Enter >.
2. The password dialog box appears.
3. If you are creating a new password, type in the password. You can type alphanumeric
characters. Symbols are ignored. The Administrator/ User Password item differentiates between
upper and lower case characters. Press < Enter > after you have typed in the password. To
confirm the password, type the password again and press <
Enter
>.
4. Write the passwords down and keep them in a safe place.
Clear Adminitrator/ User Password
To clear the password, leave the dialog box blank, press <Enter>, when the confirm box appears,
press < Enter > again.
Case Open Warning
This item allows you to enable or disable the case open detecting function.