Partner SP-1060, Service Manual

Page: 39 / 72

4
39
Setting up RAID
This section explains how to setup RAID function.
To create a RAID volume:
1. Go to BIOS > SATA Mode Selection , set to RAID and then save and exit.
SATA Mode Selection [RAID]
AHCI
RAID
SATA Mode Selection
2. Reboot and press
CTRL + I
to enter RAID Option ROM.
Intel(R) Rapid Storage Technology - Option ROM
Copyright (C) Intel Corporation. All right reserved.
RAID Volumes:
None defined.
Physical Devices:
ID
Device Model Serial # Size Type/Status(Vol ID)
1 XXXXXXXXXXX XXXXX XXXGB Non-RAID Disk
2 XXXXXXXXXXX XXXXX XXXGB Non-RAID Disk
Press <CTRL-I> to enter Configuration Utility...
3. Choose
1. Create RAID Volume
[ ]
DISK / VOLUME INFORMATION
4. Recovery Volume Options
5. Acceleration Options
6. Exit
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
[ ] MAIN MENU