Partner SP-1060, Service Manual

Page: 41 / 72

41
To remove a RAID volume:
1. Select 2. Delete RAID Volume
[ ] DISK / VOLUME INFORMATION
4. Recovery Volume Options
5. Acceleration Options
6. Exit
RAID Volumes :
ID Name
Level Strip Size Status Bootable
0 Volume1 RAID1(Mirror) N/A XXXGB Normal Yes
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Member Disk(0)
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk(0)
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
[ ] MAIN MENU
2. Press Delete key to remove the selected RAID volume.
[ ] DELETE VOLUME MENU
Deleting a volume will reset the disks to non-RAID.
[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete “Volume0”? (Y / N) :
DELETE VOLUME VERIFICATION
[ ]
3. Confirm the message and then press
Y
key.
4. The status will display Non-RAID Disk .