Particulate Systems HPVA Series, Operator'S Manual, Page: 48 / 124

Notes (1) and (2) Enter any additional notes about the sample here, for example, the
degas time.

Low Pressure Factor If you check this option, the system will not dose the manifold to a
pressure exceeding the Value times the desired sample pressure in
the pressure table if it is below the entered pressure. This is
typically used below 2 bar with a factor of 2.
If you select this option, use the arrow keys to select the pressure
in the
Use below field and the value in the Value field.

High Pressure Factor If you check this option, the system will not dose the manifold to a
pressure exceeding the Value times the desired sample pressure in
the pressure table if it is above the entered pressure. This is
typically used above 2 bar with a factor of 1.5
If you select this option, use the arrow keys to select the pressure
in the
Use below field and the value in the Value field

Recall Template Click this button to load a saved template.

Save Template Click this button to save the current experiment definition for
future experiments.

Add Click this button to add a run to the experiment. Refer to “Define
Run Window” on page 2-29 for field descriptions.

Edit Click this button to edit the selected run. Refer to “Define Run
Window” on page 2-29 for field descriptions.
Cut

Paste Above

Paste Below

Use these button to rearrange the order of runs during the
experiment.
Run Experiment Click this button to start the experiment.

Close Click this button to close the System Experiment Definition
window and return to the Main Menu.
Definitions of Fields in the System Windows HPVA Series Operator’s Manual
2-28 Mar 2011