Particulate Systems HPVA Series, Operator'S Manual, Page: 73 / 124

HPVA Series Operator’s Manual System Configuration Window
Mar 2011 5-3
Tasks Tab
Unrestricted Evac Pressure When the system vacuums down the manifold, the restricted
vacuum will be used until this pressure is reached; when this
pressure is reached, the system will open Valve 5, allowing a
strong vacuum to be applied to the system.

Default Ambient Temp Enter the air temperature of the lab.

Data Directory By clicking the … button next to the Data directory field you can
change the directory in which data files are written (this can be
done more conveniently by selecting
Change Data Directory
from the Main Menu).

Advanced Mode Check this box to run the instrument in Advanced Mode . To
prevent damage to the system, this option should only be enabled
at the direction of a Micromeritics/Particulate Systems service
representative.
Analog Input Tasks Lists the tasks configured with the NI MAX software used to read
data from the instrument. These tasks are configured during
software installation.

Analog Output Tasks Shows the task associated with the control of a recirculation bath.
This task is configured during software installation.