Parrot Products MTC-4500, User Manual

Page: 13 / 105

13 13 13 13
/
105 105 105 105

The USB port is used for creating or upgrading Launcher by clicking Download button, when a USB stick is
plugged in.
3.1.3 Factory Reset
 Start up the Base unit.

When the Home Screen is shown up, press the reset button at the rear panel of base unit. Press this button
with a pointed object, e.g. an unbent paper clip until the “ Factory Reset” page is shown up as below, for at
least 2 seconds.
 The Base unit will reboot after 3 seconds to be default configuration.
 If you do not have a picture, press and hold the reset button until the red LED in the top panel will lit, to
execute the reset.
All previous settings will be lost and you will need to do the set-up once more.
Default Configuration
 Ethernet:
 DHCP: Enable

Wireless network:
 Frequency: 5GHZ
 Channel: Auto
 Auto change WiFi hotspot password: 5minute
 Display & Audio

HDMI resolution: Auto
 HDMI CEC:
 Device auto power off: ON

Base unit auto power on: OFF
 Audio output: Jack&HDMI

Airplay screen quality: High
 show device name and password when mirroring: OFF
 show PCs user name when mirroring: ON