PARKZONE P-47 Thunderbolt, Instruction Manual

Page: 6 / 56

6
EN
*OTUBMMJOH8JOHT
*OTUBMMJOH)PSJ[POUBM5BJM
1. Install tube in hole in fuselage.
2. Install left horizontal tail on tube.
*OTUBMMMFGUIPSJ[POUBMUBJMJOGVTFMBHFNPVOU
4. Install right horizontal tail on tube, in mount and on connector with left tail
panel.
5. Apply 4 pieces of tape on fuselage mounts and top and bottom
of horizontal tail.
6. Attach clevis to elevator control horn
TFFNBOVBMJOTUSVDUJPOTGPSDMFWJTDPOOFDUJPO
8IFOOFFEFEEJTBTTFNCMFJOSFWFSTFPSEFS
8IFSFJOTUBMMFESFNPWFDBOPQZIBUDIGSPNGVTFMBHF
2. Turn aircraft over so bottom of fuselage faces up.
1VUXJOHTHVJEFQJOTJOGVTFMBHFQMBUFIPMFT
8IFSFVTFEQVUBJMFSPOnBQBOEMBOEJOHHFBSDPOOFDUPSTJOIPMFJOGVTFMBHF
/PUF .BLFTVSFDPOOFDUPSTEPOPUGBMMPVUPGGVTFMBHFBGUFSXJOHJTJOTUBMMFE
"MJHOBOEBUUBDIXJOHUPGVTFMBHFVTJOHTDSFXT
CAUTION:
Do NOT crush or otherwise damage wiring when attaching
wing to fuselage.
6. Turn assembled fuselage and wing so the bottom of the wing is down.
8IFSFVTFEDPOOFDUBJMFSPOnBQBOEMBOEJOHHFBSDPOOFDUPSTUPUIFSFDFJWFS
or Y-harnesses.
/PUF
There is no difference between 2 connections on a Y-harness. Left and
right servo connectors do not have to be connected to a particular side of a
Y-harness.
8IFSFOFFEFEEJTBTTFNCMFJOSFWFSTFPSEFS
M3 X 25
/PUF Not to scale. Not all wiring
is shown. Tape is not shown.