PARKZONE P-47 Thunderbolt, Instruction Manual

Page: 10 / 56

10
EN
%JTBTTFNCMZ
3FNPWFTQJOOFSOVUQSPQFMMFSCBDLQMBUFBOEDPMMFUGSPNUIFNPUPSTIBGU
/PUF : A tool is required to turn the spinner nut.
2. Remove 4 screws from cowling.
$BSFGVMMZSFNPWFDPXMJOHGSPNGVTFMBHF
/PUF 1BJOUNBZLFFQDPXMJOHBUUBDIFEUPUIFGVTFMBHF
4. Remove 4 screws from motor mount and fuselage.
%JTDPOOFDUNPUPSXJSFTGSPN&4$XJSFT
6. Remove 4 screws and motor from motor mount.
/PUF ,FFQSVCCFSXBTIFSTBUUBDIFEUPUIFNPUPSNPVOUXIFOSFNPWJOH
screws and motor from motor mount.
"TTFNCMZ
1. Attach motor to motor mount using 4 rubber washers and 4 screws.
$PSSFDUMZBMJHOXJSFDPMPSTBOEDPOOFDUNPUPSUP&4$
"UUBDINPUPSNPVOUUPGVTFMBHFVTJOHTDSFXT
4. Attach cowling to fuselage using 4 screws.
"UUBDIDPMMFUCBDLQMBUFBOEQSPQFMMFSUPNPUPSTIBGUVTJOHTQJOOFSOVU
/PUJDF
The propeller side with the numbers for diameter and
QJUDI GPSFYBNQMFYTIPVMEGBDFPVUGSPNUIFCBDLQMBUF
/PUF Tool required to tighten spinner nut on collet.
Elevator down
Rudder left
Rudder right
#JOEZPVSBJSDSBGUBOEUSBOTNJUUFSCFGPSFEPJOHUIFTFUFTUT.PWFUIFDPOUSPMTPOUIFUSBOTNJUUFSUPNBLFTVSFBJSDSBGUDPOUSPMTVSGBDFTNPWFDPSSFDUMZ
$POUSPM%JSFDUJPO5FTU
3VEEFS
&MFWBUPS
"JMFSPO
Elevator up
Aileron left Aileron right
Flap switch
'MBQT
4FSWJDFPG1PXFS$PNQPOFOUT
CAUTION
%0/05IBOEMFUIFNPUPSPS&4$XIJMFUIFnJHIUCBUUFSZJTDPOOFDUFEUPUIF&4$1FSTPOBMJOKVSZDPVMESFTVMU
M1.5 X 6
M2 X 10
M3 X 10
M3
High Rate Low Rate
Aileron
NNVQEPXO NNVQEPXO
Elevator
NNVQEPXO NNVQEPXO
Rudder NNMFGUSJHIU NNMFGUSJHIU
1/2 or Takeoff Flap Full Flap
Flap down 15mm down 25mm
%VBM3BUFT