![background image](http://html1.mh-extra.com/html/parkside/pdmfg-180-a1/pdmfg-180-a1_translation-of-the-original-instructions_4083808025.webp)
PDMFG 180 A1
■
22
│
GB
│
MT
WARNING!
►
The noise emission levels specified in these
instructions have been measured in ac-
cordance with the standardised measuring
procedure specified in ISO 15744 and can
be used to make equipment comparisons.
The noise emission values vary in accordance
with the use of the compressed air tool and
may be higher than the values specified in
these instructions in some cases. It is easy to
underestimate the noise emission load if the
compressed air tool is used regularly in a
certain manner.
NOTE
►
For an accurate estimate of the noise emis-
sion load during a certain working period,
the times during which the appliance is
switched off or is running but not actually
being used must also be taken into consider-
ation. This can significantly reduce the noise
emission load over the total working period.
WARNING!
General safety
instructions for
compressed air tools
WARNING!
►
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
NOTE
►
The terms "compressed air tool" or "tool" used
in the following text refer to the compressed
air tools specified in these operating instruc-
tions.
Save all warnings and instructions for future
reference.
■
The user must evaluate the specific risks that
may arise due to different kinds of use.
■
Please ensure that you have read and understood
the safety instructions before fitting, operating,
repairing, servicing or replacing any accessories
and before working near the compressed air
tool. Failure to do this can result in serious bodily
injury.
■
The compressed air tool should only be set up,
adjusted or used by adequately qualified and
trained operators.
■
The compressed air tool may not be modified.
Modifications can reduce the effectiveness of
the safety measures and increase the risks for
the operator.
■
Never use damaged compressed air tools.
Maintain compressed air tools with care. Check
regularly whether moving parts function correct-
ly and do not jam; check whether any parts are
broken or damaged to an extent that the com-
pressed air tool will no longer operate correctly.
Check signs and labels for completeness and
readability. If damaged, have parts repaired or
replaced before using the compressed air tool.
Many accidents are caused by poorly main-
tained compressed air tools.
Summary of Contents for PDMFG 180 A1
Page 3: ......