PDMFG 180 A1
■
4
│
IT
│
MT
Valore di emissione delle vibrazioni:
Valore totale di vibrazione rilevato conformemente
a ISO 28927-3 ed EN 12096:
Trapano ad aria compressa:
a
h
= 2,10 m/s
2
Fattore di incertezza K = 0,71 m/s
2
Cricchetto ad aria compressa:
a
h
= 4,00 m/s
2
Fattore di incertezza K = 0,89 m/s
2
Levigatrice a penna ad aria compressa:
a
h
= 1,09 m/s
2
Fattore di incertezza K = 0,62 m/s
2
AVVERTENZA!
►
I valori di emissione acustica indicati nelle
presenti istruzioni sono stati misurati secondo
un procedimento di controllo conforme alla
norma ISO 15744 e possono essere usati
per un confronto tra vari apparecchi. I valori
di emissione acustica cambiano in base
all'uso dell'utensile ad aria compressa e in
alcuni casi possono superare i valori indicati
nelle presenti istruzioni. Il carico da emissione
acustica potrebbe risultare sottostimato se
l'utensile ad aria compressa viene utilizzato
regolarmente in tal modo.
NOTA
►
Per una stima precisa del carico da emissione
acustica durante un dato periodo di lavoro,
si dovrebbe tenere conto anche dei tempi nei
quali l'apparecchio viene spento o gira, ma
non è effettivamente in uso. Ciò può ridurre
nettamente il carico da emissione acustica
per tutto il periodo di lavoro.
WARNING!
Avvertenze generali sulla
sicurezza degli appa-
recchi ad aria compressa
AVVERTENZA!
►
Leggere tutte le indicazioni relative alla
sicurezza e le istruzioni.
L'errata applicazio-
ne delle indicazioni relative alla sicurezza e
delle istruzioni può causare scosse elettriche,
incendi e/o gravi lesioni.
NOTA
►
Il termine utilizzato nel seguente testo "appa-
recchio ad aria compressa" o semplicemente
"apparecchio" si riferisce agli apparecchi
ad aria compressa menzionati nel presente
manuale di istruzioni.
Conservare le indicazioni relative alla sicu-
rezza e le istruzioni per un uso futuro.
■
L'utente deve valutare i rischi specifici che po-
trebbero manifestarsi sulla base di ogni singolo
impiego.
■
Leggere e comprendere le indicazioni di sicu-
rezza prima dell'allestimento, azionamento,
riparazione, manutenzione e sostituzione degli
accessori nonché prima del lavoro nelle vicinan-
ze dell'apparecchio ad aria compressa. In caso
contrario, si potrebbero verificare gravi lesioni
fisiche.
■
L'utensile ad aria compressa deve essere alle-
stito, impostato o utilizzato esclusivamente da
utenti qualificati e addestrati.
■
Non eseguire modifiche all'utensile ad aria
compressa. Le modifiche possono ridurre l'effi-
cacia delle misure di sicurezza e aumentare i
rischi per l'utente.
Summary of Contents for PDMFG 180 A1
Page 3: ......