Parkside Performance PWSAP 20-Li C3, Operation And Safety Notes

Page: 53 / 259

52 GB/IE
˜
Mounting the guard for
cutting
NOTE
u
For cut-off grinding, you must fit the guard
for cutting
[ ]
to the guard for grinding
[ ]
.
m
WARNING!
Before mounting or removing the guard
for cutting
[ ]
: Switch the product off.
Remove the battery pack
[ 5]
from
the product to prevent the product
from starting unintentionally. Let the
product cool down before mounting or
removing the guard for cutting!
Switch the product off. Remove the battery
pack
[ 5]
from the product to prevent the
product from starting unintentionally.
Remove the grinding/cutting disc, if
applicable (see “Attaching/removing the
accessory tool”).
Align the teeth on the edge of the guard for
cutting
[ ]
with the guard for grinding
[ ]
.
Turn the guard for cutting
[ ]
clockwise until
you can feel the lock on the guard for cutting
clicking into place (Fig. I).
Check if the guard for cutting
[ ]
is firmly
seated.
˜
Removing the guard for
cutting
Switch the product off. Remove the battery
pack
[ 5]
from the product to prevent the
product from starting unintentionally.
Remove the grinding/cutting disc, if
applicable (see “Attaching/removing the
accessory tool”).
Press the lock on the guard for cutting
[ ]
outwards. Turn the guard for cutting counter-
clockwise (Fig. I).
˜
Removing the guard for
grinding
m
WARNING!
Before mounting or removing the guard
for grinding
[ ]
: Switch the product
off. Remove the battery pack
[ 5]
from
the product to prevent the product
from starting unintentionally. Let the
product cool down before mounting or
removing the guard for grinding!
Switch the product off.
Remove the battery pack
[ 5]
from the
product to prevent the product from starting
unintentionally.
Remove the grinding/cutting disc (see
“Attaching/removing the accessory tool”).
Remove the backing flange
[ ]
.
Remove the retaining ring
[ ]
from the groove
of the aluminium head.