56
OPEN & REPLACE SPOOL LINE
2
PREPARE WINDINGS
1
OPEN THE SPOOL
Open the spool by pressing one of the two clips
to loosen the cover. Once loose firmly press the
second clip and remove the spool cartridge from
inside the housing.
The cartridge consists of two windings which
need to be wound in the direction shown on the
body. Secure the replacement wire to the cartridge
as shown.
NOTE:
Replacement strimmer wire should be 2.4mm in diameter.
i
57
OPEN & REPLACE SPOOL LINE
3
SECURE WINDING
4
REPEAT STEP 2 & 3
Secure the winding inside one of the two lugs to
grip the cord and prevent it unwinding.
Repeat steps 2 & 3 for the second winding and
thread back through the eyelets. Securing the
cover by repeating ‘Step 1’ in reverse.
