manualshive.com logo in svg

Parker PGMT-5200, Owner'S Manual

Share
Download
Parker PGMT-5200 Owner'S Manual Download Page 23

44

45

THE HARNESS

THE HARNESS

Included with your PGMT-5200 is the 

harness. The harness ensures you can work 

both safely and comfortably whilst using 

your machine.

It features padded straps for extra comfort, 

protective thigh pad, fully adjutable straps 

and a quick release hook.

Place the Harness over your head ensuring 

that the padded shoulder straps are placed 

on to your shoulders

Lock the snap buckle to secure the harness 

loosely in place

1

THE HARNESS

1

2

PLACE OVER HEAD

3

SNAP BUCKLE

The harness is fully adjustable with 8 strap 

adjusters to ensure the best possible fit. Be 

sure to evenly spread the weight over both 

shoulders using the strap adjusters.

Tighten or loosen the harness to best suit 

your frame. Please be aware you may need 

to re-adjust to ensure the harness is in the 

most comfortable position to suit you.

Ensure the thigh pad is located in the correct 

position so it protects you fully from pres-

sure points created from contact with the 

machine during use.

The thigh pad is normally positioned on the 

right hand side, this is the same side that the 

machine will be positioned.

Your harness is designed to be worn with 

the snap buckle at the front.

The Multi Tool should hang on the right and 

rest against the thigh pad.

The back plate should sit centrally on your 

back. Adjust the harness so it is secured 

against your body in the most comfortable 

position.

The harness is easily adjusted by utilizing 

the strap adjusters. 

1

ADJUST TO FIT

4

5

THIGH PAD

6

FRONT VIEW & REAR VIEW

CAUTION:

 For your own safety, comfort and for best results always use the PGMT-5200 with the harness provided

Summary of Contents for PGMT-5200










































Reviews:

No comments

Brands by name

Popular brands

Load more brands