LX80L Series Product Manual
33
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Step 4
: Gently remove the existing Limit trigger
decal with a razor blade or with your finger nail.
Dispose of this decal,
Do Not Reuse Decals,
adhesive may not adhere properly if reused
resulting in decal falling off and stage crashing
into end stops. Special care should be taken
not to nick white trigger background. Clean
trigger background with a small amount of iso-
propyl alcohol and a clean cloth to remove any
adhesive left by trigger.
Step 5
: Apply new Limit trigger at desired hori-
zontal location as defined in the
Determine
Desired Position
on page 23.
Step 6
: The top of the trigger should align with
the top of the white background. Smooth and
press the trigger decal to insure it is adhered
properly. Repeat this procedure for the other
limit trigger.
Step 7
: If the main top cover is supplied, verify
that the two top cover spacers are in position.
Main Top Cover Spacer
Step 8
: If supplied with main top cover, reat-
tach with four flat head hex screws.
Summary of Contents for LX80L
Page 56: ......
