Introduction
Compact Linear Actuator - LCB
8
192-510014 N06 April 2013
changes in the required design properties in some circumstances, which in turn
could negatively effect the active and/or passive operating safety of the product.
The manufacturer is unable to accept any liability for damage caused by using non-
original parts and accessories.
Safety and protection devices are strictly NOT to be removed or bypassed or set
out of order.
Applicable requirements and national accident prevention regulations must always
be observed when installing and operating our linear motor module.
1.5
Packaging, storage, transport
First check
Check the packaging for damages.
Remove the packaging.
Do not discard the packaging; it is strongly recommended to use the original
packaging material for return deliveries.
Depending on the storage location, metal surfaces may have a temperature of
0 °C or below. Please provide appropriate worker protection (e.g. protective
gloves).
Please ensure that the consignment does correspond to your order.
Check the product for damages. Do never use a device which seems damaged.
Please read the installation manual carefully before installing or commissioning
the device.
Packaging material
The packaging material is inflammable, if it is disposed of improperly by
burning, lethal fumes may develop.
Transport
Make sure to transport the linear module always in a safe manner and with the aid
of suitable lifting equipment (
Means of transport
(see on page 9)).
Storage
The linear module must be stored evenly and without any mechanical load.
The stated storage temperature must be adhered to.
Disposal
We recommend to dispose of the respective materials in accordance with the
respectively valid environmental laws. The following table states the materials
suitable for recycling and the materials which have to be disposed of separately.
Material
suitable for
recycling
Disposal
Metal
yes
no
Plastic materials
yes
no
