Maintenance
and service
Compact Linear Actuator - LCB
16
192-510014 N06 April 2013
In this chapter you can read about:
Safety Instruction ............................................................................................................. 16
Maintenance schedule ..................................................................................................... 17
Check free movement of the sliding carriage ................................................................... 17
Replacement interval for wearing parts ............................................................................ 17
Checking / exchanging / tensioning toothed belt .............................................................. 20
Use only authentic spare parts.
Improper or unprofessional repair will lead to an expiry of any warranty.
If you encounter problems, please contact:
Service Dept.
Phone: +49 (0)781 509-700
Fax: +49 (0)781 / 509-98316
3.1
Safety Instruction
Before performing any maintenance or repair work, turn the power switch to the '0'
setting and secure it with a padlock against manipulation. If the unit needs to be
operable for specific repair works, you have to be especially cautious. Ensure by all
means that no persons are in the hazardous area. If required, safeguard the
hazardous area with additional barriers or gratings against unauthorized persons.
Repair jobs must only be performed by qualified specialists or employees of
Parker.
Only qualified expert personnel is permitted to perform works on the linear
actuator. All the applicable regulations and provisions must be heeded (IEC, EN,
national accident prevention regulations etc.).
Qualified persons as the term is used in this manual are persons who:
Persons who, by virtue to their training, experience and instruction, and their
knowledge of pertinent norms, specifications, accident prevention regulations and
operational relationships, have been authorized by the person responsible for the
safety of the system to perform the required task and are capable of recognizing
potential hazards and avoiding them (definition of technical personnel according
to VDE015 or IEC364),
Persons who have a knowledge of first-aid techniques and the local emergency
rescue services.
Persons who have read and will observe the safety instructions.
If set-up, repair or maintenance works require that safety installations be
dismounted, these must be reinstalled immediately after the respective works
have been completed. The unit must be shut down before any of the safety
installations are dismounted.
3. Maintenance and service
