Personal safety
GVI Product Manual: Frames C, D & E
8
192-300300N1 GVI Frames C, D & E 2019-9
CAUTION
This section describes the risk of the hazard, for example Risk of damage to
equipment
A Caution informs the user of a hazard or potential hazard that could result in damage to the
equipment if the precautions or instructions given in the caution notice are not
observed/followed.
NOTE
A note contains supplemental information or references to supplemental information on a
topic.
2. Personal safety
Parker provides this and other manuals to assist manufacturers in using the GVI in a proper, efficient and
safe manner. Manufacturers must ensure that all persons responsible for the design and use of equipment
employing the GVI have the proper professional skills and knowledge about the equipment.
WARNING
High voltage/high torque - risk of personnel injury
The high power levels and high torque available from a motor and motor controller
combination can cause severe or fatal injury.
The Motor controller is intended for connection to battery voltage sources and for use with
low voltage AC motors.
Before installation, always verify that the motor controller model is correct for the vehicle’s
battery supply voltage. The DC Supply nominal voltage is shown on the motor controller’s
identification label, see chapter 6.2 Components on the GVI.
2.1
Safety signs on the equipment
Table 1 shows the signs used on Parker’s products. Use of the signs varies between products.
