Set-Up
ETH- Electromechanical Cylinders
Error! Use the Home tab to apply Überschrift 1 to the text that you
want to appear here.
ETH - Elektrozylinder
14
192-550002N2 ETH Mounting instructions March
2011
The linear module is furnished completely mounted and mechanically ready-to-operate.
If no Parker drive is provided, attach your motor-gearbox combination according to the
instructions of the respective supplier.
The technical data must be respected.
See from page 6 in the catalog section (following the mounting instructions).
2.1
Mounting
Caution!
Please use only the parts offered in the Parker ETH catalog for the following
mounting components:
◆
Rear Eye Mounting (order code E)
◆
Rear Clevis (order code C) with bearing pedestal
Standard parts in accordance with the ISO flange standard
cannot be used for
these accessories, as they are not sufficiently stable.
Please Note:
◆
The cylinder housing must be mounted without tension or contorsion.
◆
The cylinder housing must be precisely aligned to the load direction of motion.
◆
Occurring lateral forces on the cylinder must be taken into consideration.
2.1.1.
Mounting with mounting threads on the cylinder
The easiest and most economic method of mounting is using the available mounting
threads on the cylinder body. Make sure that the mounting surface is level and that the
cylinder is mounted without tension and contortion. This method of mounting is only
possible, if the lower side of the mounting surface is accessible.
Dimensions: see in the catalog section (following the mounting instructions) on page 16.
2.1.2.
Mounting with mounting accessories
Cylinder mounting with mounting plates or foot mounting brackets
If the underside of the mounting surface is not accessible, mounting plates or foot mounting
brackets are available as accessories.
Mounting methods: see from page 19 in the catalog section (following the mounting
instructions).
Dimensions: see in the catalog section (following the mounting instructions) on page 16.
The rear mounting plate cannot be fixed with inline motor configuration.
If you fix the cylinder only at the rear end (e.g. also with a rear clevis) please respect the
effective direction of the known forces. Critical are above all lateral forces in horizontal or
vertical direction.
Permissible side load: See from page 13 in the catalog section (following the mounting
instructions).
In this chapter you can read about:
Mounting ......................................................................................................................... 14
Electric installation ........................................................................................................... 17
Motor and feedback mounting ......................................................................................... 19
Exchanging the toothed belt ............................................................................................ 24
Belt / belt tensions ........................................................................................................... 24
2. Set-up
