Introduction
ETH- Electromechanical Cylinders
Error! Use the Home tab to apply Überschrift 1 to the text that you
want to appear here.
ETH - Elektrozylinder
10
192-550002N2 ETH Mounting instructions March
2011
1.4.6.
Safety Instructions for Operating Personnel
Any work step that has a negative effect on the operating safety of the linear motor module
must be omitted.
Operating and supervisory personnel are required to check the linear actuator or machine
at least once per shift for externally visible damage or defects. Changes that have occurred
(including the operating behavior) that could have a negative effect on the operating safety
must be reported immediately.
Components and accessories are designed especially for this product. When purchasing
spare and wearing parts, use only original Parker parts. We note here explicitly that we are
unable to check or release spare parts or accessories that were not provided by us.
Installing and/or using such products may cause negative changes in the required design
properties in some circumstances, which in turn could negatively affect the active and/or
passive operating safety of the product.
The manufacturer is unable to accept any liability for damage caused by using non-original
parts and accessories.
Safety and protection devices are strictly NOT to be removed or bypassed or set out of
order.
Applicable requirements and national accident prevention regulations must always be
observed when installing and operating our linear motor module.
1.5
Packaging, storage, transport
First check
◆
Check the packaging for damages.
◆
Remove the packaging.
Do not discard the packaging; it is strongly recommended to use the original packaging
material for return deliveries.
◆
Depending on the storage location, metal surfaces may have a temperature of 0 °C or
below. Please provide appropriate worker protection (e.g. protective gloves).
◆
Please ensure that the consignment does correspond to your order.
◆
Check the product for damages. Do never use a device which seems damaged.
◆
Please read the installation manual carefully before installing or commissioning the device.
Packaging material
The packaging material is inflammable, if it is disposed of improperly by
burning, lethal fumes may develop.
Transport
Make sure to transport the linear module always in a safe manner and with the aid of
suitable lifting equipment (Means of transport).
Storage
The linear module must be stored evenly and without any mechanical load.
The stated storage temperature must be adhered to.
Disposal
We recommend disposing of the respective materials in accordance with the respectively
valid environmental laws. The following table states the materials suitable for recycling and
the materials which have to be disposed of separately.
Material
suitable for
recycling
Disposal
Metal
yes
no
Plastic materials
yes
no
