Introduction
ETH- Electromechanical Cylinders
Error! Use the Home tab to apply Überschrift 1 to the text that you
want to appear here.
ETH - Elektrozylinder
30
192-550002N2 ETH Mounting instructions March
2011
B
Belt / belt tensions - 22
C
Conditions of utilization - 11
D
Device assignment - 5
Direction of the motor during extension of the
cylinder - 15
E
Electric installation - 14
Exchanging the toothed belt - 22
F
Further information - 29
G
Gap
Inline Coupling gap - 23
Parallel Pulley gap - 24
General hazards - 7
Greasing via central lubrication port (standard)
- 25
I
Identifying Residual Dangers and Hazardous
Areas - 7
Intended use - 7
Introduction - 5
L
Lubricating intervals and amount of lubricant -
24
M
Maintenance - 25
Motor / gearbox mounting with inline motor
configuration - 18
Motor / gearbox mounting with parallel motor
configuration - 19
Motor and feedback mounting - 17
Mounting - 13
Mounting explanation - 6
Mounting notes - 14
Mounting of the payload - 14
Mounting with mounting accessories - 14
Mounting with mounting threads on the
cylinder - 13
P
Packaging, storage, transport - 9
R
Re-apply toothed belt pre-tension (reinsert the
same toothed belt) - 20
Relubrication via central lubrication port
(option) - 26
Repair - 27
Resetting the toothed belt pre-tension (new
toothed belt) - 21
S
Safety instructions - 7
Safety Instructions for Operating Personnel - 8
Safety Instructions for the Company Using the
System - 8
Sensor mounting - 15
Sensors - 14
Setting the end limits - 16
Set-up - 13
Side Load - 14
Special notes on transport - 10
T
Type specification plate - 5
W
Warranty conditions - 11
Working safely - 8
5. Index
