Bulletin TI-NITROFLOW TG2-G
Installation, Operation and Maintenance Manual
TI-NITROFLOWTG2
www.labgasgenerators.com
7
1-800-343-4048
The generator drain tube is a black nylon ¼” tubing connecting the drain outlet to the provided
disposal container (see Figure 8). A blue silencer is provided for the discharge end of the tubing
to reduce the discharge noise. Periodically check the built in strainer to ensure it has not clogged.
The pre-filter and water separator drain tubes are also a black nylon ¼” tubing connecting the
drain outlets to the same provided disposal container (see Figure 8). Blue silencers are provided
for each drain line.
The three outlet gas ports consist of three ¼” NPT bulkhead fittings. Parker Balston recommends
minimum ¼” PFA plastic tubing with a minimum pressure rating of 125 psig (8.6 bar). Check all piping
connections for leaks using a bubble-type leak detecting solution.
Drains
Outlet Gases
Figure 8
There are seven plastic tubing connections for the NitroFlow TG2 generator: (1) nitrogen outlet
gas connection; (2) dry air outlet gas connections; (4) drain connections. Press the tubing into
the quick-connect fittings. Assure tubing is fully inserted (about ½”). Tubing is provided in the
installation kit. For remote locations, additional length tubing is provided.
Piping
The following table describes the necessary mains cordset based on region.
Do Not Replace the
provided cordset with an inadequately rated cordset. The plug on the cordset is the mains
disconnect.
The electrical schematic for the generator is shown in Figure 31 on page 23.
The following table
describes the cordset
required for each region:
*
Note: JA-200 versions include
an external step-up transformer.
System
Region
Description
Cordset
Part
Rating Number
NitroflowTG2NA
North America 230V-60Hz cordset, US plug
30A, 250VAC A03-0430
NitroflowTG2NA
North America 230V-60Hz cordset, US twistlock
30A, 250VAC A03-0410
NitroflowTG2WD
EU,India,UK
230V, 50Hz cordset
32A, 250VAC A03-0344
Australia
230V, 50 Hz cordset
32A, 250VAC A03-0345
China
230V, 50 Hz cordset
32A, 250VAC A03-0347
NitroflowTG2JA200 JA
230V, 50 Hz cordset, with JA PSE plug 20A, 250VAC A03-0408
!
NEMA 6-30R
Figure 7a
30
30
Figure 7b
