Parker 1P1V-S020A00005, Manual

Page: 45 / 68

45
Drilling, milling and grinding motors P1V-S
Drilling motor P1V-S008N
Our smallest and most versatile drilling motor for small-scale drilling operations.
The standard collet chuck is for 3 mm shaft diameter.
For other diameters, select a different collet chuck as an accessory.
The motor has a port for a 6 mm hose to remove the exhaust air
to a silencer.
Data for drilling motor P1V-S008N
Max power Free Version Drilling in Drilling in Air con- Conn. Min pipe Weight Order code
speed steel aluminium sumption at ID
max power
kW rpm mm mm l/s mm Kg
0,080 4000 Collet chuck 3 mm - 3 3,8 M8 x 0,75* 4 0,0 P1V-S008N0Q00
0,080 7000 Collet chuck 3 mm 3 3 3,8 M8 x 0,75* 4 0,0 P1V-S008N0700
0,080 1900 Collet chuck 3 mm 3 3 3,8 M8 x 0,75* 4 0,
P1V-S008N0190
0,080 1300 Collet chuck 3 mm 3 3 3,8 M8 x 0,75* 4 0, P1V-S008N0130
* push in nipples (F8PMB6M8SP) for plastic pipe Ø6/4 supplied
Accessories for drilling motor P1V-S008N
Name Order code
Collet chucks
Collet chuck Ø mm
P1V-6/314693
Collet chuck Ø3 mm Standard
Collet chuck Ø3/3" P1V-6/314694
Collet chuck Ø1/8" P1V-6/314407
Average speed Drilling Ømm
Material 1 2 3 4 5 6 7 8 9 10
35 m/min 11000 5500 3700 800 00 1900 1600 1400 100 1100
Unalloyed steel up to 500 N/mm²
8 m/min
8800 4400 3000 00 1800 1500 1300 1100 975 880
Unalloyed steel from 500 to 700 N/mm²
5 m/min
7800 3900 600 000 1600 1300 1100 975 865 780
Unalloyed steel over 700 N/mm²
14 m/min
4400 00 1500 1100 880 735 630 550 490 440
Alloyed steel from 700 to 900 N/mm²
11 m/min
3400 1700 1100 850 680 570 485 45 380 340
Alloyed steel from 900 to 1100 N/mm²
7 m/min
00 1100 730 550 440 365 315 75 45 0
Stainless steel
m/min
7000 3500 300 1700 1400 100 1000 875 780 700
Cast iron up to 180 N/mm²
1 m/min
3800 1900 1300 950 760 630 540 475 40 380
Cast iron over 180 N/mm²
50 m/min
16000 8000 5300 4000 300 700 300 000 1800 1600
Copper, red metal, bronze, brass
90 m/min
8000 14000 9000 7000 5600 4800 4000 3500 3100 800
Rough light-alloy metal, screw brass²
165 m/min
5000 6000 17300 13000 10400 8700 7400 6500 5800 500
Hardened light-alloy metal
10 m/min
66000 33000 000 16500 1300 11000 9400 8300 7400 6600
Magnesium alloy¹
NOTE! All technical data is based
on a working pressure of 6 bar.
Installation brackets, see page 35
Dimensions, see page 53
Permitted shaft loadings, see page 61
Service kits, see page 64
Standard speeds for HSS spiral drills
1 Speeds for processing two-component plastics, cardboard or
plastic-coated fabrics plaster, HSS drills must not be used - use a
high-speed steel drill fitted with a hard metal K10 instead
double the values for thermoplastics