Parker 1P1V-S020A00005, Manual

Page: 14 / 68

14
Stainless Steel Air Motors P1V-S
Technical data
Working pressure Max 7 bar (max 6 bar
in explosive atmospheres)
Working temperature -30 °C to +100 °C
Ambient temperature -0 °C to +40 °C
in explosive atmospheres
Medium 40 µm filtered, oil mist or
dry unlubricated compressed air
Table and diagram data
All values are typical values, with a tolerance of ±10%
Option
Other variants on request
Material specification
Planetary gearbox for:
P1V-S060A0010 /30 /48
P1V-S10A001 /3 Stainless steel, X46Cr13
Planetary gearbox for last planet stage incl. installation flange
P1V-S00A0011 /06
P1V-S030A003 /10
Black oxidised steel (not stainless)
All other housings Stainless steel, X1CrMoS17
Spindle* Hardened stainless steel, X0Cr13
Key* Hardened stainless steel
X6CrNiMoTi17-1-
External seal Fluor rubber, FPM
Internal steel parts High grade steel (not stainless)
Planetary gear grease USDA-h1 approved
* P1V-S00A0011/06 and P1V-S030A003/10
Key and Shaft
High grade steel (not stainless)
Screws in housing
in last planet stage Surface treated steel (not stainless)
Flange bracket Stainless steel, X1CrMoS17
Foot bracket Stainless steel, X5CrNi18
Screws for bracket Stainless steel DIN A
Choice of vanes
0 = Standard
Standard vanes = These motors are of the vane type for inter-
mittent lubrication-free operation. They can operate 70% of the
time for up to 15 minutes without lubrication. With lubrication,
these motors can operation 100% of the time.
Z = Spring loaded (standard) vanes
Standard vanes = These motors are of the vane type for inter-
mittent lubrication-free operation. They can operate 70% of the
time for up to 15 minutes without lubrication. With lubrication,
these motors can operation 100% of the time.
Spring loaded vanes = All vanes are spring loaded to ensure
that they remain pressed against the cylinder when the motor
stops. The spring loaded vane option also prevents the vanes
from sliding down in their track if vibration is introduced. The
spring loaded vanes therefore provide a higher starting torque,
improved starting and low speed characteristics, because the
leakage over the vanes is reduced to a minimum.
C = Vanes for continuous lubrication-free operation
C vanes = This motor is equipped with vanes for continuous
lubrication-free operation. (To obtain the longest possible
service life, we recommend no oil in the air.)
M = Multi (combination of Z+C)
C vanes = This motor is equipped with vanes for continuous
lubrication-free operation. (To obtain the longest possible
service life, we recommend no oil in the air.)
Spring loaded vanes = All vanes are spring loaded to ensure
that they remain pressed against the cylinder when the motor
stops. The spring loaded vane option also prevents the vanes
from sliding down in their track if vibration is introduced. The
spring loaded vanes therefore provide a higher starting torque,
improved starting and low speed characteristics, because the
leakage over the vanes is reduced to a minimum.