8 - Chemical anchoring on flat ground
StradaPAL – Installation manual
26/43
8.4
Chemical anchoring on flat ground with base box
This type of installation makes it possible to raise the terminal by 137 mm in
relation to the height of the ground.
For installation with base box, the use of the protective plate for the anchoring
is required in order to ensure the safety of the installation.
Install the protection plate in the base box, against the front.
Fix the anchoring rods (450 mm long) to the base box using 8x M16 nuts so
that the ends of the rods are
104 mm
away from the fastening brackets.
The nuts are to be placed (104 mm away from the end of the threaded rods) as
instructed for secure installation.
Identify the location of the future centre of the terminal in accordance with
the dimensional requirements detailed in the "Dimensions" section.
Drill 4x Ø20 holes in the floor over a depth of 250 mm, on the basis of the
drawing below:
Front of the base
box
Protection
plate
D9730
Base
box
104+/
-
1
m
m
Threaded rod
D9733
Fastening
bracket
Protection
plate
