G. How to Take Your Treatment
16 Questions about eRapid? Call 1-866-335-6943
Step G6.
Attach the Connection Cord to the Controller.
Place the Controller on a clean, flat, stable surface.
Attach the Connection Cord round end to the front
of the Controller (
Figure G6
).
Step G7.
Place the Mouthpiece in your mouth.
Sit in a
relaxed position. Place the end of the Mouthpiece
on top of your bottom lip and tongue and close your
lips around it (
Figure G7
). Keep the Handset level
and
DO NOT
cover the Blue Flap with your mouth.
Step G8.
Turn on the Controller
. Press and hold the
On/Off button for 1-2 seconds
(Figure G8a)
. The
following will happen:
•
You will hear 1 “beep” and the status light will
turn green.
•
The eFlow Technology logo will appear on the
screen.
•
If your eRapid Nebulizer system is assembled
correctly, your Controller will switch and display
the
Treatment Screen
(
Figure G8b
). The
Controller will continue to show the Treatment
Screen throughout your entire treatment. Note
that this example screen shows the Controller is
powered by batteries.
•
After a few seconds, aerosol mist will begin to
flow into the Aerosol Chamber of the Handset
and out of the Mouthpiece.
Status Light
G6
G7
G8a
G8b
